HSS ( M2 ) Slitting Saws are manufactured for Ferrous Metal and for Non-Ferrous metal Industry. These Blades are specifically suited for use in manual, semi-automatic and fully-automatic sawing operations. All blades are hardened to 63/64 HRC, triple tempered and pressed quenched to give flattest saw possible. These blades are manufactured incorporating the latest developments in cutting geometries and surface treatments.

These circular saws confirm to IS 5031/DIN 1837 having diameters from 20mm to 400mm and thickness range from 0.2mm to 6mm.


The raw material for HSS Saws are rolled metal sheet, cut into blanks. The heat treatment is done by a very morden automatic, ecologically safe throughfeed hardening line. A consistent and optimal hardness of the tools is guaranteed with this new technology.Circular Cutting Saw Blades, Circular Cutting Knives and Slitting Cutters are manufactured with consistently tight tolerances on width, side-runout, diameter, and concentricity.


Non Ferrous

The teeth profile given are A, AW, B, BW, C and Chip Breaker Type.


Straight Tooth
Normal for < 3 mm pitch

Curved Tooth
Normal for > 3 mm pitch

Triple Chip
General Purpose for
Steel > 4 mm pitch

Straight Bevel
Variant of Type A Tooth

Curved Bevel
Variant of Type B Tooth

Chip Breaker Type Thin Wall Tubes, > 4 mm pitch



Tailor-made saw as per the Customer’s Specifications/Drawing can be offered on request


Various Surface Treatments are given to the Saws to enrich its quality and performance viz. Liquid NitridingSteam TemperingTin CoatingCryogenic Treatment.

4 months ago