HSS ( M2 ) Slitting Saws are manufactured for
Ferrous Metal and for Non-Ferrous metal Industry. These Blades are specifically suited for
use in manual, semi-automatic and fully-automatic sawing operations. All blades are
hardened to 63/64 HRC, triple tempered and pressed quenched to give flattest saw possible.
These blades are manufactured incorporating the latest developments in cutting geometries
and surface treatments.
These circular saws confirm to IS 5031/DIN 1837 having diameters from 20mm to 400mm
and thickness range from 0.2mm to 6mm.
|
|
| The raw material for HSS Saws
are rolled metal sheet, cut into blanks. The heat treatment is done by a very morden
automatic, ecologically safe throughfeed hardening line. A consistent and optimal hardness
of the tools is guaranteed with this new technology. Circular
Cutting Saw Blades, Circular Cutting Knives and Slitting Cutters are manufactured with
consistently tight tolerances on width, side-runout, diameter, and concentricity. |
| |
Ferrous |
Non
Ferrous |
 |
 |
| |
|
The
teeth profile given are A, AW, B, BW, C and Chip Breaker Type.
|
|
|
Straight Tooth
Normal for < 3 mm pitch |
|
|
Curved Tooth
Normal for > 3 mm pitch |
|
|
Triple Chip
General Purpose for
Steel > 4 mm pitch |
|
|
Straight Bevel
Variant of Type A Tooth |
|
 |
Curved Bevel
Variant of Type B Tooth |
|
|
Chip Breaker Type Thin Wall Tubes, > 4 mm
pitch |
|
